Electric Heater Pi Heating Film Thin Ploymide Heater for Car Mirror Defrosting

Basic Info

Model NO.	HY-020
Voltage Range	1.5V~400V
Power Density	0.03W/Cm2~2.5W/Cm2
Temperature Range	-60~200 Degree
Width Range	10mm~500mm
Length	10mm~1800mm
Thickness	Standard:0.126~0.266mm
Plug	Chinese,British,American,;European
Life	More Than 4 Years
Product Name	Polyimide Film
Transport Package	Crtons Package
Specification	200*300mm
Trademark	Hengyan
Origin	China(Mainland)
HS Code	8516800000
Production Capacity	30000pieces/Day

Product Description

Polyimide Heater >>>
We usually say it is polyimide heaters. This is is very thin,the thickness is about 0.3mm,it is very light,so it is widely used on 3D printer.the normal size for 3D printer are follow,1,200*200mm,12v,200w2,260*290mm,12v,145w3,200*250mm,12v,90w and so on. any size,any shape can be customize. please contact with us.
4. Light-weight, thin thickness offer faster warm-ups and quicker response.5. Very flexible offer thermal contact with the Part for maximum heating efficiency.6. Offered in a virtually unlimited range of shapes, sizes and wattages.7. Their flat etched foil elements cover more area and transfer heat more efficiently than wire wound designs.8. On request, temperature distribute in the surface of the heater.9. Small thermal lag, precision temperature control and fast response.10. Kapton insulation is dimensionally stable, self-extinguishing, and highly resistant to oils, chemicals, fungus, solvents and radiation.11. Thermostats and other sensors may be integ rated into the design for accurate control and temperature tracing.12. PSA is available as an option on heater rated at 1W/cm2 and 2W/cm2. The heater can be mechanically clamped or epoxy mounted by the user.13. Very safety, realizable and long life.

 

 

Temperature control fittings >>>

KSD Temperature switch NTC PT-100 Thermistor 3M Adhasive Connector Aluminum plate Thermal insulation material


Technical parameters >>>
High Strength Thermal Electric Insulation PI Polyimide Heater Flexible Heating Film: 1. Medical diagnostic instruments: Heat sample trays, reagent bottles, etc.2. Stabilize optoelectronic components3. Test or simulate integrated circuits4. Enable cold weather operation of outdoor electronics such as laptap, ATM, LCD'S5. Protect aircraft eletronic and mechanical devices in cold weather / area

Description	Parameter
Certification	CE and Rohs
Voltage range	1.5v~400v
Power density range	0.03w/cm2~2.5w/cm2(0.19w/inch2~16.13w/inch2)
Using temperature range	-60~200°C(-140~392°F)
Width range	10mm~500mm(0.39"~19.68")
Length range	10mm~1800mm(0.39"~70.86")
Thickness range	Standard:0.126~0.266mm(0.005"~0.01")
Plug	Chinese,British, American, European and so on
Quality guarantee	1 year
Life	more than 4 years(normal useful)
MOQ	100 piece

Technical Datasheet:

Voltage	12~440V
Wattage	Max. 1w/cm2
Operating temperature	-60~200°C
Width	Max. 500mm
Length	Max. 1800mm
Thickness	Standard 0.126~0.266mm
Lead wires	Teflon/silicone/plug
Thermal protection	On board thermal fuse, thermostat thermistor and RTD devices are available as part of your thermal management solution.
OEM and ODM is welcomed,can print your logo.Before ordering,pls advise size,voltage and wattages.

Temperature power comparison >>>

 

uthentication >>>

 

 

Prouduct show >>>
Silicone heating plate:

Oil drum heater:


RDB heater:


PI film:


Epoxy plate heater:

 

FAQ >>>
1
Q:Are you a factory?
A:Yes. Our factory was established in 2009. We specialize in the production of silicone rubber heater. PI heating film and other heating products. Our company has passed IATF16949. UL. CE certification. Products meet ROTH standards.We're an experienced factory with our exclussive Research & Development team. Offering you the most professional service.

2
Q: Will you accept customized requirement?
A: Of course, customized service is surely acceptable. Welcome to send us your drawing and more detailed specification parameters. We can supply you the products as per your specific requirements.

3
Q:Can we order products?
A:Yes. We can design and produce according to customers'requirements. ODM/OEM orders are welcome.

4.
Q:Could I get some sample?
A: Yes, generally, 1pc sample for free is available. But if you need more samples, we may need to charge you some cost. Besides, for certain products, it may need to open mold before sampling, then we shall need to have the mold fee before sample.

5
Q: What's the delivery time for sample?
A: Generally it shall take 5~7days. For certain products, we need to prepare the materials for it. That depends.

6
Q:Can we visit your factory?
A:Welcome. Address: No. 17 Shengyang Road, Qingyang Town, Jiangyin City, Jiangsu Province. You can take airplanes, high-speed railways and cars.

7
Q:Does the product have a warranty?
A:Yes, all our heaters have a one-year warranty.

Quality Control:
Quality control is strictly in accordance with IATF16949 quality management system to implement 5S management. When the product is finished, 100% inspection is strictly carried out.
1) Strict quality control system for production process
2) Advanced inspection and quality control equipment and tools
3) 100% strict inspection of products before shipment
4) All quality complaints and improvement requirements are always carefully studied and, if reasonable, put into effect immediately.