Customized High Density Cartridge Heater Hot Rod Element for Die Mold Heating

Basic Info

Model NO.	Cartridge heater
Warranty	6000 Hours
Application	Industry Heating Process
Wattage Tolerance	+/-10%
Insulation Material	High-Purity MGO Powder
Internal Thermocouple	Type J or K
Transport Package	Box
Specification	Customized
Trademark	Superb heater
Origin	Shenzhen China
HS Code	8516800000
Production Capacity	100000

Product Description

SUPERB Heater Cartridge heater is cylindrical electrical heating elements. Protected with a seamless stainless steel sheath, their watt density can reach 63W/cm² and their operating temperature can go up to 1000°C (1832°F). Mostlycartridge heater is used for heating up solids such as injection presses heating plates or various tools, cartridge heater can also beused for heating up water of gases under certain conditions. Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc . Cartridge heaters are also commonly found in the chemical, electronics, medical equipment, packing and nuclear industries. Various cartridge heater technologies are available. The choice of technology will depend on technical specifications required and the application. Unless you know exactly which product you are looking for, we will recommend you the best solution for your need

Product Description

1) The heating part of the core of the Superb Heater cartridge heater is a nickel-chromium heat-resistant alloy wire, which is wound on a magnesium oxide core rod with excellent insulation and thermal conductivity. The heating wire and the shell are filled with magnesium oxide powder as an insulating material, and the air inside is compressed by the machine to make it into a whole.2) After the main body of the cartridge heater is completed, the fixing piece or thread can be installed according to the installation needs. The thread structure of the fixing piece is related to the heating tube installation method. Please contact our sales or technical personnel for the best solution.

Due to the various shapes and specifications, it is impossible to display all of them.If you need to customize special-shaped of cartridge heater, please contact customer service!
Product Parameters

1)Diameter 2)Volts and watts 3)Length 4)Type of lead wire 5)Select the outlet method

Main material
Heating wire	Ni8Cr20 nickel chromium wire
Insulation filling	High purity magnesium oxide powder
Shell (protection tube)	SS304,SS321,SS310S,SS316,TA1,Incoloy800(NCF800)
Lead	Silicone glass fiber (temperature resistance 250ºC)Teflon (temperature resistance 250ºC)High temperature glass fiber (temperature resistance 400ºC)Ceramic beads (temperature resistant to 800ºC)
Lead protection	Silicone fiberglass sleeving, SUS braided hose, SUS hose
Sealed end (sealing)	Ceramic/ceramic glue (temperature resistant 800ºC)Silicone rubber (temperature resistant 180ºC)Resin (temperature resistance 250ºC)

Standard diameter size reference
1) DiameterΦ in mm: 2, 3, 4, 5, 6, 6.5, 8, 9.5, 10, 12, 12.5, 14, 15, 15.8, 16, 18, 19, 20, 25, 30, etc.2) DiameterΦ inch: 1/4", 3/8", 1/2", 5/8", 3/4", 1", etc. (Remarks: 1 inch = 25.4 mm)3) Note: High-power cartridge heater are used in the mold heating, and mounting holes need to be reserved on the mold according to the size of the cartridge heater (or the outer diameter of the cartridge heater can be customized according to the size of the mounting hole).Superb Heater suggest Minimize the gap between the cartridge heater and the mounting hole. When machining the mounting hole, it is recommended that the gap on one side be less than 0.05mm.

Specification&Precautions

What is the difference between terminal type and inner lead?
From the figure above, we can clearly see the difference between the terminal type and the inner lead structure.1) The terminal type is the lead rod and the lead wire are connected outside the cartridge heater through the crimping terminal. 2) The inner lead is the lead wire is directly connected from the inside of the cartridge heater.The terminal type usually uses the glass fiber sleeve to wrap the wiring, 1. to increase the insulation protection, 2. to protect this part of the lead to avoid excessive bending..

----------------------Where is the cartridge heater will be use?--------------------------

Because of the small volume and large power of the cartridge heater, it is especially suitable for the heating of metal molds. It is usually used with thermocouple to achieve good heating and temperature control effect.Superb Heater Cartridge heater main application fields: stamping die, hot cutting knife, packaging machinery, injection mold, extrusion mold, rubber forming mold, melt injection mold, hot pressing molding machinery, semiconductor processing, pharmaceutical machinery, uniform heating platform, liquid heating, etcNote: The "slash area" in the figure represents the heating section of the superb heater heating tube

1) Note: Customize the hole depth of the mold according to the length of the heating part of the cartridge heater
---If the hole is too shallow, the heating part of the cartridge heater will be exposed after installation, and there is without good heat dissipation environment, which will damage the cartridge heater and and even may cause fire and other accidents.

---If the hole is too deep, the sealing and wire part of the cartridge heater after installation will fall into a more severe use environment. Long-term use may lead to short circuit between electrodes and other problems.

2) Note: The heating tube should be protected from moisture. It is recommended to start with a low voltage during initial use.
---The cartridge heater should be moisture-proof, and it is recommended to use lower voltage for initial use.

When the superb heater cartridge heater is stored and used in a high humidity environment, the insulation resistance will decrease. but after the cartridge heater is powered on, the moisture will evaporate, and the insulation performance will gradually recover. It is recommended to start the cartridge heater with lower voltage.

Product Photo&Application

Material,Factory show&Test

-------------------Superb Heater Product laboratory----------------------1) The mold cartridge heater is a product developed by Superb Heater Company and has undergone many trials and tests.2) Each new product developed by Superb Heater Company will be tested in our professional laboratory in all aspects of performance, especially the function completion and thermal stability under load conditions.3) After the new product is tested, the experimental data is generated. Our Superb Heater engineers analyze the data and then feed the results back to the engineering staff for product optimization to ensure that customers get the product that best meets their expectations.

CertificationsOrder Information

1.About product ordering: The above product pictures are for reference only, size or drawings must be provided for ordering.2.About the online price: the online price is the sample price, and the bulk price needs to be determined accordingto the product drawings and quantity. Please continue to contact us or calling Superb Heater Company to ask detail.3.About delivery: nonstandard customized products have more special certain production processes, the actual delivery date is subject to negotiation with Superb Heater Company.

FAQ

Q1: Are you trading company or manufacturer ?
A: We are factory that have 2000 square meter.Q2: How long is your delivery time?
A: Generally it is 5-7 days if the goods are in stock. Out of stock10-15 days. It is according to quantity.
Q3: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, it can negotiable.Q4: Can you print the Logo I requested?
A: Yes. We can do OEM.